Tuesday, December 13, 2016
Mac Upgrade! - 30 Nov 2016
I currently own a Mac Pro 5.1 (mid 2010) that has a dual Quad-core processor (2 x 2.40 GHz Quad-Core) and 6 GB RAM (1066MHz DDR3). Its a wonderful computer, but now running MacOS Sierra (Ver 10.12.1) it is frustratingly slow when I'm trying to run Lightroom and Photoshop CS. Some current stats:
From complete Shut-Down to Log-in Screen: 1' 04"
From Log-in Screen to Screen: 8"
Lightroom Start-up: 1'20"
PS CS Start-up: 48"
I then tried a Lightroom import test. I took 50 images from my Sony a6300 (25.7 MB per image) and used my ScanDisk SD Card Reader to read the files from a ScanDisk Extreme Pro 128 GB (95 MB/s) card into Lightroom. I have Lightroom to automatically Build Smart Previews, so the following times were measured:
50 image Import (Copy only) in Lightroom: 1'07" + SmartPreviewBuild: 1'48" = 2'55" Total
if I include Copy to DNG (from the AWR RAW file format of the Sony a6300) then the times are:
50 image Import (Copy to DNG): 1'03"
Convert to DNG + SmartPreviewBuild: 4'39"
The Sony a6300 has the ability to capture 4K video. My Mac Pro does not have the ability to play the videos in Lightroom smoothly. PS CS cannot play the videos, either. So, I currently forward the videos 1 frame at a time in order to find screen shots that might give me clean, sharp image of my subject (see previous blog).
So, the MacSales.com website had an advert from OWC (Otherworld Computing) for their Mercury Accelsior E2 PCI Express SSD. Add to cart. I also decided to upgrade my memory from 6 GB to 64 GB. Add to cart. Proceed to Checkout. With both purchases made, it was now time to wait and see what Santa will bring for this little lap dance...
In the meantime, I downloaded a freeware program called Carbon Copy Clone that would allow me to clone my hard drive to an external 3TB Passport Drive. Installation was straightforward, and all you have to do is select "Trial Version", select Source (Hard Drive) and Destination (Passport Drive) and click "Run". It took about 2.5 hrs to transfer 277 GB and create an exact copy of my hard drive, which I'll now save as a Recovery Drive.
3 Days later, a package arrived and I proceeded to make upgrades. I first shut down the Mac and removed the side cover. I removed the memory card bay and quickly inserted the eight 8 GB memory chips. I then powered up the computer and quickly saw that I now had 64 GB memory! Easy-peasy.
I shut down the computer and then inserted the Mercury Accelsior E2 SSD in one of the PCI slots. When I powered up the computer, however, I got an ominous message indicating that the computer did not recognize the drive and asked if I wanted to "Initialize" it. I said "Yes" and immediately went to Disk Utilities. The computer could not Erase the drive, or initialize it, because it only saw 33Kb memory installed (its supposed to have 960 GB). A call to the OWC Support site resulted in bad news; the card is no good. Bummer. I was given an RMA number and a promise that a new card was on its way.
3 Days later, the replacement SSD arrived, and within minutes it was installed and Initialized. I rebooted the computer and held down the [Option] key so that I could select it as the Boot drive.
I then used Carbon Copy to clone the old Hard Drive over to the new SSD. I then went into System Preferences and selected Startup Disk and selected the SSD as the Primary Boot Disk. Restarted the computer. The difference was IMMEDIATE!
Boot up: 10 seconds (versus 1'04")
From Log-in Screen to loaded screen: 2 seconds
Lightroom Start-up: 9" (versus 1'20")
PS CS Start-up: 6" (versus 48")
I then tried the Lightroom Import test. Curiously, there was NO improvement. Import and conversion times were identical to earlier tests - I could only guess that the read/write speed was due to the USB card reader and not the computer.
So, when I tried the import from the hard-drive, Import speed was 6" (from 1'03")! But, conversion times were identical to earlier tests! ???? Not sure, why. But, Lightroom runs smooth and fast; I can review files instantly, instead of waiting 5-10" for an image to load.
And, I can now play 4K videos cleanly and seamlessly! Photoshop CS has yet to crash on me because of loss of RAM. Today, I opened 30 image files and Photo-merged them to form a super-panorama; it only took 4 minutes (versus 25' in the past)!
Thank you Santa! And thank you, OWC! The Mercury Accelsior E2 PCI Express SSD is an absolute must for anyone wanting to modernize their older Mac Pro computers. That, and a memory upgrade will give you a 2010 Power Mac that is as powerful as a 2016 Power Mac.